Results for conrad components continuity tester pcb assembly kit

12345Next

Conrad Components Continuity Tes...

Acoustic continuity tester, especially for testing cables, conductor tracks and contacts. The advantage of this circuit is that soldered components don\'t have any effect on the measurements. An acoustic signal tells you when there\'s a short circuit.



Click For Info
Conrad Components 5A DC Motor Sp...

This pulse duration controller offers continuous brightness control of lamps or speed control for small power drills and other DC motors. Setting range from 0 to 100% An adjustable current limiter (only in kit version) protects the circuit from short-circuits or blocks the motor shaft.



Click For Info
Conrad Components Thermostat Var...

Once constructed, this kit can be used to switch on 230V appliances such as a heater, heatpipes or similar when a set temperature is undershot. A KTY 81-220 temperature sensor (thermistor) determines temperature and the limits are set by the user via a trimpot. A separate trimpot can be used to...



Click For Info
Conrad Components Voltage Doubli...

A DC voltage is generated with this circuit which amounts to the double of the feeding voltage(example: input voltage of 12 V/DC, output voltage of approximately 24 V/DC). Applications include: charging batteries, increasing voltage from solar cells, operating 24 V devices at 12 V.



Click For Info
Conrad Components 1.2 - 30Vdc Va...

Continuously adjustable power supply, a must in any enthusiast\'s workshop. A current limiter makes the device short-circuit proof. Because of its large adjustable voltage range it has a wide range of uses. Ideal for operating kits and modules. Operational status indication is provided by an LED.



Click For Info
Conrad Components Alternating DC...

Light bulbs of up to 18 W can be attached to this alternating flasher. The flashing frequency can be continuously adjusted.



Click For Info
Conrad Components Motorcycle Ala...

Protect your motorcycle against theft. This alarm system responds especially to changes in the angle of inclination of the motorcycle. Once armed, the system becomes immediately active. A change of position then immediately sets off the alarm, using either the existing horn or another specially...



Click For Info
Conrad Components 10A DC Motor S...

Continuously adjustable speed for low-voltage electric motor. This motor is mainly used with DC power drills, model cars, windshield wiper drives as well as electronic tools. Due to the pulse duration control, which works with an adjustable frequency between 600 Hz and approx. 2 kHz, the power loss...



Click For Info
Conrad Components precision inte...

Turns devices on and off at preset intervals. The timer range can be individually set from approx. 200 ms to 100 s with a potentiometer. An LED indicates when the switch has been actuated.



Click For Info
Conrad Components 500 mV univers...

The sensitivity adjustment to the attached sound source is achieved through variable negative-feedback. You can set the sensitivity to between approx. 10 and 600 mV.



Click For Info
Conrad Components Water Level Re...

For all liquid-level-controls, such as an automatic flower watering plant: By means of two electrodes (sheet strips, rust-free wire), which you simply insert in the ground of your flower bed or flower pot, the ohmic resistance of the garden ground or of the soil of the flowers is measured. When the...



Click For Info
Velleman MK105 Function Generato...

For the creation of sine, triangle and square waves. The signal frequency is approx. 1 kHz (fixed). The output level is adjustable between 0 - 100 mVeff.



Click For Info
H-Tronic 1 - 30V Variable Power ...

A high-performance, reliable laboratory power supply can be built with the power supply circuit. Because of the wide-ranging adjustability of voltage and current this circuit can also be used in a demanding laboratory environment. The adjustments to current and voltage as well as fine adjustment to...



Click For Info
PSU card Assembly kit Conrad Com...

PSU card Assembly kit Conrad Components ATT.FX.INPUT_VOLTAGE: 230 Vac (max.) ATT.FX.OUTPUT_VOLTAGE: 12 Vdc (max.)



Click For Info
Stereo amplifier Assembly kit Co...

Stereo amplifier Assembly kit Conrad Components 9 Vdc, 12 Vdc, 18 Vdc 80 W 2 ?



Click For Info
Fluke T110 Voltage Continuity Te...

Fluke T90, T110, T130 and T150 Two Pole Voltage and Continuity Testers - FLUKE FLUKE T110, The Fluke T110 Voltage/Continuity Tester with Switchable Load is a rugged, high quality tester for giving you faster test results when you need them. The Fluke T110 Electrical Tester is a voltage and...



Click For Info
Martindale MARTEK402 Continuity ...

Martindale-Continuity-Tester-with-Audible-Indication-Martindale-MARTEK402-This-continuity-tester-from-Martindale-is-a-low-cost-easy-to-use-instrument-with-audible-indication-Martindale-MARTEK402-Continuity-Tester



Click For Info
Megger MIT430 Insulation & C...

Megger-MIT430-Insulation-and-Continuity-Tester-Megger-MIT430-EN-P-This-MIT430-Insulation-and-Continuity-Tester-from-Megger-is-the-perfect-meter-when-looking-to-test-insulation-resistance-voltage-and-continuity-in-electrical-installations-P-P-Designed-with-a-host-of-excellent-features-that-allow-nume...



Click For Info
Fluke T150 Voltage Continuity Te...

Fluke T90, T110, T130 and T150 Two Pole Voltage and Continuity Testers - FLUKE FLUKE T150, The Fluke T150 Voltage/Continuity Tester with Switchable Load is a high quality tester for giving you faster test results when you need them. It is ideal for site conditions, test and measurement in...



Click For Info
Fluke T130 Voltage Continuity Te...

Fluke T90, T110, T130 and T150 Two Pole Voltage and Continuity Testers - FLUKE FLUKE T130, The Fluke T130 is an Electrical Tester, a voltage/ continuity tester with LCD and switchable load. The T130 is a rugged, high-quality tester, and ideal for those that need fast test results the way you need...



Click For Info
Martindale MARTEK404 Audible &am...

Martindale-TEK404-Audible-and-Visual-Continuity-Tester-Martindale-MARTEK404-P-The-Martindale-TEK404-continuity-tester-adds-a-visual-indication-as-well-as-audible-indication-and-comes-complete-with-a-belt-clip-Featuring-a-bright-LED-the-TEK404-also-has-a-safety-measure-to-prevent-use-on-live-circuits...



Click For Info
IC PCB Phenolic paper (L x W) 50...

IC PCB Phenolic paper (L x W) 50 mm x 110 mm 35 µm Contact spacing 2.54 mm Conrad Components SU527700 Content 1 pc(s)



Click For Info
IC PCB Phenolic paper (L x W) 16...

IC PCB Phenolic paper (L x W) 160 mm x 100 mm 35 µm Contact spacing 2.54 mm Conrad Components SU527670 Content 1 pc(s)



Click For Info
SMD eurocard PCB Epoxide (L x W)...

SMD eurocard PCB Epoxide (L x W) 160 mm x 100 mm 35 µm Contact spacing 2.54 mm Conrad Components SU527858 Content 1 pc(



Click For Info
SMD eurocard PCB Epoxide (L x W)...

SMD eurocard PCB Epoxide (L x W) 160 mm x 100 mm 35 µm Contact spacing 1.27 mm Conrad Components SU528048 Content 1 pc(



Click For Info
Prototyping PCB Epoxide (L x W) ...

Prototyping PCB Epoxide (L x W) 54.80 mm x 26.40 mm 35 µm Contact spacing 2.54 mm Conrad Components FPC34P-50P Content



Click For Info
Prototyping PCB Epoxide (L x W) ...

Prototyping PCB Epoxide (L x W) 25.40 mm x 25.40 mm 35 µm Contact spacing 2.54 mm Conrad Components QFN44-QFN48 Content



Click For Info
Prototyping PCB Epoxide (L x W) ...

Prototyping PCB Epoxide (L x W) 37 mm x 35.6 mm 35 µm Contact spacing 2.54 mm Conrad Components TSOP56-SOP56 Content 1



Click For Info
Prototyping PCB Epoxide (L x W) ...

Prototyping PCB Epoxide (L x W) 33 mm x 33 mm 35 µm Contact spacing 2.54 mm Conrad Components QFN56P-QFN 64P Content 1



Click For Info
Prototyping PCB Epoxide (L x W) ...

Prototyping PCB Epoxide (L x W) 18 mm x 15.6 mm 35 µm Contact spacing 2.54 mm Conrad Components SSOP16-L Content 1 pc(s



Click For Info
Prototyping PCB Epoxide (L x W) ...

Prototyping PCB Epoxide (L x W) 15.6 mm x 10.16 mm 35 µm Contact spacing 2.54 mm Conrad Components SOP14-SSOP14 Content



Click For Info
Prototyping PCB Epoxide (L x W) ...

Prototyping PCB Epoxide (L x W) 40.50 mm x 15 mm 35 µm Contact spacing 2.54 mm Conrad Components QFN32P-40P Content 1 p



Click For Info
Prototyping PCB Epoxide (L x W) ...

Prototyping PCB Epoxide (L x W) 46 mm x 38 mm 35 µm Contact spacing 2.54 mm Conrad Components TQFP32-100P-32-64P Conten



Click For Info
Prototyping PCB Epoxide (L x W) ...

Prototyping PCB Epoxide (L x W) 12 mm x 12 mm 35 µm Contact spacing 2.54 mm Conrad Components SOP8 Content 1 pc(s)



Click For Info
Prototyping PCB Epoxide (L x W) ...

Prototyping PCB Epoxide (L x W) 12.5 mm x 10.3 mm 35 µm Contact spacing 2.54 mm Conrad Components SOP10-SOT23 Content 1



Click For Info
IC PCB Epoxide (L x W) 95 mm x 5...

IC PCB Epoxide (L x W) 95 mm x 53 mm 35 µm Contact spacing 1.27 mm Conrad Components SU520884 Content 1 pc(s)



Click For Info
Prototyping PCB Epoxide (L x W) ...

Prototyping PCB Epoxide (L x W) 67 mm x 57 mm 35 µm Contact spacing 2.54 mm Conrad Components FPC50P-DIP Content 1 pc(s



Click For Info
Prototyping PCB Epoxide (L x W) ...

Prototyping PCB Epoxide (L x W) 40.64 mm x 20.25 mm 35 µm Contact spacing 2.54 mm Conrad Components QFN-QFP32 Content 1



Click For Info
Prototyping PCB Epoxide (L x W) ...

Prototyping PCB Epoxide (L x W) 26 mm x 24 mm 35 µm Contact spacing 2.54 mm Conrad Components FPC50P Content 1 pc(s)



Click For Info
Prototyping PCB Epoxide (L x W) ...

Prototyping PCB Epoxide (L x W) 30.48 mm x 17.8 mm 35 µm Contact spacing 2.54 mm Conrad Components SOP24P-SSOP24P Conte



Click For Info

12345Next