Results for custom brackets hdveb extended locking shoe mount

12345Next

Custom Brackets HDVEB Extended L...

An extended locking shoe mount, for use with the DV PRO, HDV Cage, HDV Wing, and HDV Run & Gun (D-clip style screw not included).



Click For Info
Custom Brackets WFM-1 Locking Sh...

This locking shoe is designed to mount wireless flash triggers via its 1/4\" - 20 thread. The mount features an anti-rotation fitting, ensuring that the wireless controller stays neatly facing in the right direction. For use with RF-PRO Series, CB Series (except CB Mini, CB Mini-RC, CB Digital-SB,...



Click For Info
Custom Brackets RF-WT Wireless T...

The RF-WT is a locking shoe mount with anti-twist top piece, designed to smartly and conveniently mount a shoe-mount wireless transmitter onto a Custom Brackets RF-PRO. A very pro-looking piece of kit!



Click For Info
Custom Brackets WFM2 Locking Sho...

The WFM-2 is a locking shoe mount for mounting wireless transmitters. It is designed for use with the CAB 9, CAB 14, CB Mini-RC and CB Mini.



Click For Info
Custom Brackets RF-WT Wireless T...

The RF-WT is a locking shoe mount with an anti-twist fitting is designed to mount a flash transmitter onto the RF-PRO bracket. The WFM-1 can be indexed 90 degrees on the RF-WT.



Click For Info
Lastolite TriFlash Bracket with ...

Allowing the use of 3 hotshoe mounted flasguns together, the Lastolite TriFlash Bracket with Locking Shoe Mount features an adjustable \'screw locking\' shoe mount, which offers an additional locking mechanism to work alongside the built in method used on the flashgun. The dimensions of the hotshoe...



Click For Info
Lastolite Tilthead Bracket with ...

The Lastolite Tilthead Bracket with Locking Shoe features an adjustable ?screw locking\' shoe mount, which offers an additional locking mechanism to work alongside the built in method used on the flashgun. The dimensions of the hotshoe on the bottom of each flashgun can vary from one gun to the...



Click For Info
Custom Brackets MC

The Custom Brackets MC is a cold shoe mount for locating your radio slave unit, focusing light or TTL module to the upright of a Custom Bracket camera and flash mount.



Click For Info
Custom Brackets CN-JR Mount

The Custom Brackets CN-JR Mount is an anti-twist mount for off camera flash cords. Not required for shoe mounted flash.



Click For Info
Custom Brackets GFT Shoe Mount A...

This is a Shoe Mount Adapter for tilt-head wireless shoe mounted flashguns.



Click For Info
Custom Brackets Tilt Head Flash ...

The Custom Brackets Tilt Head Flash Mount is designed for use with Custom Brackets Pan-Tilt AS, Tilt Head AS, CB Gimbal and CB Gimbal-LS together with Arca-Swiss compatible dove-tailed lens feet and plates. The adjustable extension allows you to position a flash up to 18 inches above the centre of...



Click For Info
Custom Brackets FR

The Custom Brackets FR is a replacement flash receiver which can also be used as a mount for a second flash on a Custom Bracket flash mount.



Click For Info
Custom Brackets GFM Gimbal Flash...

The Custom Brackets GFM Gimbal Flash Mount is an adjustable flash mount with 6\" extension. For use with all Gimbals or Arca-Swiss style compatible dove-tails. The flash can be mounted above the lens, or at a 45 or 90 degree angle. The flash arm may also be reversed so that the flash can be...



Click For Info
Interfit Strobies Adjustable Sho...

The Interfit Strobies Adjustable Shoe Mount is a replacement or additional shoe mount with a 1/4 inch thread which enables the use of larger foot flashguns such as the Nikon SB900 with the Strobies XS bracket or INT334. It may also be mounted on camera tripods to provide stable footing in order to...



Click For Info
Custom Brackets FT-JR

The Custom Brackets FT-JR is a flash mounting plate for hot shoe mounted flash without off camera connecting cord. For use with Digital PRO-E, CB Junior, CB Digital-T, and CB Digital-S only.



Click For Info
Custom Brackets FS

The Custom Brackets FS is a flash mounting plate for Sunpak 622 and 544 barrel type flashguns. For use with Custom Bracket camera and flash mount.



Click For Info
Custom Brackets Gimbal Basic

Designed to fit Arca-Swiss type ball heads the Custom Brackets Gimbal Basic can hold lenses up to 400mm (with the optional GLM-2 plate). The maintenance free roller bearing movement means the lens is easy to tilt while there are separate rubber coated locking knobs.



Click For Info
Custom Brackets QR-C

The Custom Brackets QR-C camera quick release is a must for taking full advantage of the Custom Bracket systems. This plate will allow you to quickly mount different camera makes and models (with different heights) to your bracket. It requires one camera plate and one camera sub plate C-SP for each...



Click For Info
Custom Brackets FT

The Custom Brackets FT is a flash mounting plate for Vivitar 283 and 285, Metz 40 and 54 and Sunpak 120J flashguns. For use with Custom Bracket camera and flash mount.



Click For Info
Custom Brackets QR-C Kit

The Custom Brackets QR is a camera quick release and sub-plate kit - a must for taking full advantage of the Custom Bracket system. This kit will allow you to quickly mount different camera makes and models (with different heights) to your bracket. (Includes one qr-C and one C-SP). Requires one...



Click For Info
Custom Brackets CK-500 Conversio...

The Custom Brackets CK-500 Conversion Plate is designed to convert a Custom Bracket into an Arca -Swiss type mount. Designed for use with the following:- Digital PRO-M, Digital PRO-E, Digital PRO-SV, QRS-H2, QRS-E2, QRS-35-H, QRS-35-EV, QRS-35-SV.



Click For Info
Custom Brackets CMPL Camera Moun...

The CMPL is used to mount a Sony A900 or A77 camera onto a Custom Brackets flash bracket.



Click For Info
Custom Brackets Gimbal-LB Tripod...

When it comes to tripod-mounting DSLRs with long lenses, a gimbal mount is hard to beat in terms of balance, ease of handling and peace of mind. The Custom Brackets Gimbal-LB mounts a lens of up to 400mm sideways for easy handling, and utilises roller-bearings which give an almost liquid smoothness...



Click For Info
Custom Brackets QRA Quick Releas...

The Custom brackets QRA is an Arca-Swiss style tripod quick release with 1/4-20\" Tripod Mount. A CK-500 is required for bracket to tripod use.



Click For Info
Custom Brackets AT Plate

The Custom Brackets AT Plate is an anti twist mount designed for use with all cameras on the CB Junior, CB Digital-T and CB Digital-S.



Click For Info
Custom Brackets QR

The Custom Brackets QR tripod quick release is a must for taking full advantage of the Custom Bracket systems when using a tripod. Supplied with a 1/4\" x 20 threaded hole. The Custom Brackets QR is not for use with QRS-35-PJ, CB Junior, CB Digital-S, CB Digital-T or CB Mini.



Click For Info
Phot-R TriFlash Cold Shoe Mount ...

The Phot-R TriFlash Cold Shoe Mount to standard 1/4-20 threaded studs, is designed to be used on most light stands. Normally used for photography to hold three flashes, you can also use it for video by mounting three on-camera type LED video lights to make one larger light source. Great accessory...



Click For Info
Custom Brackets Foot Shield

The Custom Brackets Foot Shield is designed to protect the rubber foot on the Manfrotto 685B that forms part of their Custom Brackets SteadyPod.



Click For Info
Custom Brackets Anti Twist Pins

The Custom Brackets Anti Twist Pins are designed for use with the Tilt Head supplied as part of the Custom Brackets SteadyPod they give extra security when attaching the head to the monopod.



Click For Info
Custom Brackets CK-502

The Custom Brackets CK-502 is an add-on bottom plate for the Digital PRO-E, for use with a Custom Brackets tripod quick release (QR).



Click For Info
Custom Brackets CB Mini-RC

Made from anodised aluminium the simple Custom Brackets CB Mini-RC bracket will allow you to take the flash off camera when using an off-camera cord or wireless operation. The offset position of the flash means it can be used with cameras that include a vertical shutter release button. The Custom...



Click For Info
Custom Brackets FCN

The Custom Brackets FCN is a flash mounting plate for attaching Canon Off Camera Cords 2 and 3 and Nikon SC-17, 28 and 29 to Custom Bracket camera and flash brackets.



Click For Info
Custom Brackets Strap

The Custom Brackets Strap is a velcro adjustable leather strap which adds extra security when holding and carrying your bracket. It replaces the original handle whilst still allowing it to be positioned for your comfort. For use with Custom Brackets QRS-H2, QRS-E2, QRS-35-H, QRS-35-EV, QRS-35-PJ,...



Click For Info
Custom Brackets CB Digital-T

Manufactured from black anodised aluminium for strength and minimal weight, the Custom Brackets Digital-T bracket is designed for use with larger film or digital SLR\'s with a battery grip attached. Spring loaded tension makes it easy to rotate from horizontal to vertical. The bracket is designed...



Click For Info
Custom Brackets Pan and Tilt Hea...

A very compact aluminium pan and tilt head, ideal for travellers. The model features a bubble level, Custom Brackets style quick release, a captive aluminium clamp, pan/drag knobs and a black anodised finish.



Click For Info
Custom Brackets Tilt Head CB

Designed for use with long telephoto lenses, the Custom Brackets Tilt Head AS includes a Custom Brackets quick release platform (plate not included). It uses separate lock and drag knobs for better control and mounts to any monopod or tripod using a 3/8-16* threaded mounting hole.



Click For Info
Custom Brackets QRA-C Arca Swiss...

This conversion kit (comprising of a QRA-C and CK-500) is used to convert the Custom Brackets QRS-35-H, QRS-35-EV and QRS-35-SV brackets to fit the quick release system on Arca Swiss style heads and can be configured for cameras with or without vertical grips/battery packs.



Click For Info
Custom Brackets QRMCK Manfrotto ...

This conversion kit (comprising of a QRM-C and CK-501) is used to convert the Custom Brackets QRS-35-H, QRS-35-EV and QRS-35-SV brackets to fit the quick release system on the Manfrotto 3265 or 322RC2 Grip Action and standard ballheads that use the 3157N (RC2) plate.



Click For Info
Custom Brackets C-SP

The Custom Brackets C-SP is designed to attach a C35 camera plate to a QR-C (Camera Quick-Release). The C-SP requires one camera plate for each camera and a QR-C (Camera Quick-Release). It is compatible with all Digital and 35mm Camera Rotating Brackets.



Click For Info
Veho MUVI Extended Pole/Bar Moun...

Veho MUVI Extended Pole/Bar Mount Veho VCC-A026-EPM MUVI Extended Pole/Bar Mount for Bikes/Motorbike The MUVI extended pole mount is designed to give users a better field of vision which is ideal for self-portrait filming with the help of the strong and robust extended arm built to any tube...



Click For Info

12345Next