Results for extech prt200 multi tester
Handy device for a contact-less detection of alternating voltages and measurement of temperatures. If an alternating voltage is present, it is shown visually via a red LED. The temperature values can be read at the LCD-display. With its the robust casing and the belt-clip, this device is ideal for...
Click For Info
Extech-PRT200-Phase-Rotation-Tester-EXTECH-PRT200-The-Extech-PRT200-phase-rotation-tester-is-a-non-contact-phase-sequence-tester-which-checks-phase-sequence-and-phase-status-It-works-with-up-to-1000V-AC-with-LED-and-audible-indication-The-LEDs-indicate-phase-orientation-clockwise-or-counter-clockwis...
Click For Info
Extech-DA50-EU-Multi-Tester-CAT-IV-600V-EXTECH-DA50-EU-P-The-Extech-DA50-EU-multi-tester-detects-contactless-alternating-current-of-200mA-to-1000A-The-highlight-is-the-telescopic-1m-telescope-sensor-Tests-can-be-accomplished-in-such-a-way-without-climbing-or-assistance-P-Extech-DA50-EU-Multi-Tester-...
Click For Info
Extech-CT20-Cable-Tester-EXTECH-CT20-P-The-CT20-allows-a-single-user-to-quickly-identify-and-label-two-wires-even-when-the-wire-ends-are-located-in-different-rooms-The-CT-20-can-also-be-used-as-a-standard-continuity-tester-This-tester-is-shipped-fully-tested-and-with-proper-use-will-provide-years-of...
Click For Info
Voltcraft-VC-31-Multi-Tester-Voltcraft-VC-31-P-The-Voltcraft-VC-31-Multi-Tester-is-a-combination-of-continuity-tester-voltage-tester-for-direct-and-alternating-voltages-up-to-400V-and-a-simple-tester-for-fault-current-protective-switch-FI-P-P-The-removable-belt-clip-with-magnetic-holder-and-robust-A...
Click For Info
Brennenstuhl-1297150-Electronic-Multi-Tester-MT-6S-2-Brennenstuhl-1297150-P-align-left-This-Electronic-Multi-Tester-MT-6S-2-from-Brennenstuhl-has-been-designed-for-checking-phase-neutral-and-earthing-conductor-at-the-sockets-while-also-able-to-perform-continuity-checks-fuses-and-bulbs-and-polarity-c...
Click For Info
Voltcraft-MS-400-Multi-Tester-CAT-III-1000V-Contact-less-voltage-tester-Voltcraft-MS-400-P-This-product-detects-the-steady-state-electrostatic-field-generated-by-AC-voltage-via-insulation-without-requiring-contact-to-the-bare-conductor-A-red-glow-at-the-tip-and-an-acoustic-signal-indicates-the-prese...
Click For Info
Voltcraft-MS-258-II-Multi-Tester-Voltcraft-MS-258-II-P-The-Voltcraft-MS-258-II-Multi-tester-detects-AC-voltages-in-electrical-sockets-switches-fuse-boxes-cables-etc-Its-adjustable-sensitivity-makes-it-ideal-for-detecting-live-conductors-in-sockets-In-addition-the-metal-detector-function-may-be-used-...
Click For Info
Digital Multi Tester Portable, Pocket Sized 3.5 Digital Multi-tester. Ideal for the Hobbyist or Engineer. 5 Functions, 19 ranges Easily Selected with a Turn of The Single Selector Switch.
Click For Info
Voltcraft-MS-18-2-Multi-Tester-Voltcraft-MS-18-2-P-With-the-Voltcraft-MS-18-2-you-can-check-voltage-carrying-electric-lines-and-check-whether-alternating-voltage-is-applied-This-can-be-carried-out-either-with-direct-contact-or-indirect-The-indirect-measuring-can-be-especially-helpful-with-insulated-...
Click For Info
Voltcraft-VC-34-Multi-Tester-Voltcraft-VC-34-P-The-VC-34-is-intended-as-a-fast-function-test-of-residual-current-circuit-breakers-common-abbr-FI-or-RCD-in-electric-installations-of-category-III-up-to-250V-The-test-device-can-be-used-to-simulate-different-residual-currents-by-means-of-5-keys-P-P-Thes...
Click For Info
Put an end to tiresome searching for the right wire. Since the CT-20 has an additional remote unit, you can do without identification of an additional person cable even if these are moved in different areas. Apart from the allocation of the cable even the correct polarity can be determined. The...
Click For Info
Combination of continuity tester, voltage tester for direct and alternating voltages up to 400 V and a simple tester for fault-current protective switch (FI). The removable belt clip with magnetic holder and robust ABS housing with rubber protection is the ideal tester for electrical installations...
Click For Info
The current measurement in a car fuse box is often difficult with conventional multimeters due to the contacts. The flat fuse current tester from Voltcraft was specially designed for this problem. The current testers are simply plugged into a fuse slot and the current in the circuit is displayed...
Click For Info
Draper Digital Multi-Function Tester Size 18cm Colour orange For checking and testing of wiring without dismantling or having any contact with live parts Applications include: Locating break points in wiring Continuity and sense indication testing Socket, bulb and fuse testing Microwave leakage...
Click For Info
Voltcraft Phase Rotation Tester, VC3x Series - Voltcraft VC35, The Voltcraft VC35 is a Phase Rotation Tester that is able to check the phase sequence or direction of rotation of motors without a frequency converter in a three-phase network. The meter shows whether all 3 phases are available. The...
Click For Info
Voltcraft Phase Rotation Tester, VC3x Series - Voltcraft VC36, The Voltcraft VC36 is a Phase Rotation Tester that is able to check the phase sequence or direction of rotation of motors without a frequency converter in a three-phase network. The meter shows whether all 3 phases are present. The...
Click For Info
Combines a contact-less alternating voltage tester and an LED-torch in a compact, convenient device. Unique double sensitivity. The voltage tester glows blue, as soon as it comes near alternating voltage. It glows red as soon as it comes near a voltage source.
Click For Info
FLIR-VP52-CAT-IV-Vibrating-Non-Contact-Voltage-Detector-and-Flashlight-FLIR-VP52-A-CAT-IV-Non-Contact-Voltage-NCV-detector-that-is-designed-to-work-on-the-latest-tamperproof-outlets-as-well-as-standard-electrical-systems-The-detector-has-both-normal-and-high-sensitivity-ranges-with-a-190-to-1000V-or...
Click For Info
Voltage tester for detecting alternating voltages, locating cable breaks and defective fuses or for examining broken switches, sockets, junction boxes, transformers, for example, low-voltage lighting systems and light chains.
Click For Info
The Testboy 2 circuit and continuity tester has a wide range of uses. The fully insulated plastic case is shock-proof and break proof making it especially suitable for daily use in harsh environments.
Click For Info
The robust tester is usable for nearly every application, as for example household, industry, building site etc.
Click For Info
Contact-less AC-voltage tester and LED-torch in a handy device in the shape of a pen. LVD2 conforms to the safety specifications according to CAT IV 600 V and is suitable for commercial and industrial applications. The device glows in blue at a distance of 2.5 to 12 cm from the voltage source, and...
Click For Info
















