Results for kemo m087n led tester module component
This tester can be used to test light emitting diodes for all kinds of function, brightness, colour and polarity. The LEDs can optionally be tested with the following currents: 1 mA, 2.5 mA, 5 mA, 10 mA, 20 mA and 50 mA. The test contact can accommodate desoldered LEDs with solder residue on their...
Click For Info
Kemo-M048-Ultrasonic-Generator-Module-Kemo-M048-This-powerful-ultrasonic-generator-is-ideal-for-chasing-away-rats-mice-wild-rabbits-birds-etc-When-connected-to-a-suitable-piezo-speaker-the-module-produces-an-ultrasonic-tone-with-a-constantly-changing-frequency-Humans-can-usually-only-hear-frequencie...
Click For Info
Kemo-M011N-4-Channel-Running-Light-Module-Kemo-M011N-This-4-channel-running-light-module-makes-lights-and-groups-of-lights-switch-on-and-off-sequentially-at-regular-intervals-to-create-a-running-light-effect-The-module-is-ideal-for-illuminated-advertising-in-display-windows-chains-of-lights-light-ef...
Click For Info
Kemo-M038N-24V-To-12V-DC-to-DC-Converter-Module-Kemo-M038N-This-voltage-convertor-module-is-ideal-for-operating-12V-DC-vehicle-accessories-and-equipment-from-a-24V-battery-source-E-g-using-a-conventional-12V-car-radio-in-a-truck-or-boat-with-a-24V-supply-The-output-of-the-module-is-short-circuit-pro...
Click For Info
Kemo-M015N-Adjustable-3-to-15V-DC-to-DC-Converter-Module-Kemo-M015N-This-adjustable-DC-to-DC-converter-module-is-ideal-for-operating-devices-that-use-a-lower-voltage-than-that-available-from-a-battery-or-fixed-voltage-power-supply-unit-The-output-of-the-converter-is-short-circuit-proof-and-regulated...
Click For Info
Kemo-M029-Voltage-Doubling-DC-to-DC-Converter-Module-Kemo-M029-This-electronically-controllable-DC-voltage-converter-transforms-a-low-input-voltage-into-an-output-voltage-nearly-twice-as-high-However-the-output-voltage-decreases-whenever-there-is-a-higher-load-By-connecting-an-additional-4-7k-Omega-...
Click For Info
Kemo-M142-Constant-Current-LED-Driver-Module-Kemo-M142-This-module-consists-of-an-LED-soldered-to-a-constant-current-circuit-It-can-be-connected-to-any-voltage-between-4-and-30V-DC-The-LED-shines-with-almost-constant-brightness-regardless-of-voltage-and-has-a-current-consumption-of-approx-15mA-No-ad...
Click For Info
Kemo-M040N-Universal-Preamplifier-Module-Kemo-M040N-This-Kemo-preamplifier-module-is-suitable-for-microphones-and-other-general-purpose-audio-uses-The-compact-sized-module-is-simply-connected-between-a-weak-signal-source-and-the-power-amplifier-Kemo-M040N-Pre-Amplifier-Module
Click For Info
Kemo-M148A-Battery-Guard-Total-Discharge-Protection-Module-Kemo-M148A-Avoid-the-nuisance-and-damaging-effects-of-a-discharged-car-battery-with-the-Kemo-M148A-battery-guard-module-The-module-cuts-power-to-accessories-if-the-battery-voltage-drops-below-the-set-minimum-Choose-between-10-4V-11V-12V-13V-...
Click For Info
Kemo-P5123-Miniature-Piezo-Tweeter-Speaker-Kemo-P5123-The-Kemo-P5123-Miniature-Piezo-Tweeter-Speaker-has-an-aluminium-spherical-cap-for-especially-low-distortion-and-constant-high-pitch-radiation-It-is-highly-suitable-for-ultrasonic-vermin-scarers-due-to-its-robust-construction-and-small-size-Kemo-P...
Click For Info
Kemo-M122-Twilight-Light-Operated-Switch-Module-Kemo-M122-This-electronic-light-operated-switch-automatically-turns-on-lights-or-other-appliances-when-darkness-falls-and-switches-them-off-again-at-daybreak-The-module-can-also-work-in-reverse-i-e-on-at-daybreak-and-off-when-darkness-falls-Potential-f...
Click For Info
Kemo-B073-Universal-Preamplifier-Module-Kit-Kemo-B073-A-kit-of-parts-to-build-a-2-stage-pre-amplifier-with-a-wide-frequency-range-Ideal-as-a-pre-amplifier-for-power-amplifiers-or-as-headphone-amplifier-Kemo-B073-Universal-Preamplifier-Module
Click For Info
Avoid the damaging effects of deep discharge to car batteries with the Kemo M148A battery guard module and avoid flat batteries. The module cuts power to connected consumers once the battery voltage drops below the set minimum. (Choose between 10.4V, 11V, 12V, 13V, 13.3V). Once regular voltage is...
Click For Info
LED-Tester-TruOpto-LED-TESTER-A-handy-and-versatile-LED-tester-from-TruOpto-that-is-suitable-for-mono-colour-LEDs-as-well-as-bi-colour-and-tri-colour-LEDs-of-both-anode-cathode-anode-and-cathode-anode-cathode-types-Multiple-testing-holes-for-comparing-colours-brightness-etc-TruOpto-LED-Tester
Click For Info
Velleman-VMBRGBDC-RGB-LED-Dimmer-Module-Velleman-VMBRGBDC-P-A-ready-built-3-channel-5A-12V-24V-LED-dimmer-for-dimming-LED-strips-P-P-Create-an-atmosphere-which-suits-you-best-or-let-your-lights-dim-slowly-to-avoid-unexpected-surprises-It-is-also-possible-to-simulate-a-sunrise-which-makes-waking-up-a...
Click For Info
Relpol Plug-In Protection Modules for GZT/GZM Relay Sockets - Relpol M41G, The M41G is a 6 to 24V plug-in diode protection module that limits overvoltage on DC coils and also provides LED coil energising indication. Relpol M41G Plug In Diode & LED Protection Module 6-24V for GZT & GZM Sockets
Click For Info
Relpol Plug-In Protection Modules for GZT/GZM Relay Sockets - Relpol M61G, The M61G is a 6 to 24V plug-in module that provides LED indication of coil energisation. Relpol M61G Plug In LED Protection Module 6-24V for GZT & GZM Sockets
Click For Info
Relpol Plug-In Protection Modules for GZT/GZM Relay Sockets - Relpol M63G, The M63G is a 110 to 230V plug-in module that provides LED indication of coil energisation. Relpol M63G Plug In LED Protection Module 110-230V for GZT & GZM Sockets
Click For Info
TinkerKit Modular Prototyping System - TinkerKit T010116, This 10mm green LED is one of the simplest of the TinkerKit actuators. The actuator consists of a 10mm green LED mounted on a small PCB and the LED is lit when powered from an Arduino pin. Arduino TinkerKit T010116 Green LED 10mm Module
Click For Info
TinkerKit Modular Prototyping System - TinkerKit T010111, This 5mm blue LED is one of the simplest of the TinkerKit actuators. The actuator consists of a 5mm blue LED mounted on a small PCB and the LED is lit when powered from an Arduino pin. Arduino TinkerKit T010111 Blue LED 5mm Module
Click For Info
TinkerKit Modular Prototyping System - TinkerKit T010114, This 5mm red LED is one of the simplest of the TinkerKit actuators. The actuator consists of a 5mm red LED mounted on a small PCB and the LED is lit when powered from an Arduino pin. Arduino TinkerKit T010114 Red LED 5mm Module
Click For Info
TinkerKit Modular Prototyping System - TinkerKit T010113, This 5mm yellow LED is one of the simplest of the TinkerKit actuators. The actuator consists of a 5mm yellow LED mounted on a small PCB and the LED is lit when powered from an Arduino pin. Arduino TinkerKit T010113 Yellow LED 5mm Module
Click For Info
7W Power LED Modules - Ligitek LG-CB07W-05S3PC-D801, A 7W, cool white power LED array mounted on a star type substrate. With a luminous output of 700lm and viewing angle of 120° this power LED is suitable for a wide range of illuminative applications. Ligitek LG-CB07W-05S3PC-D801 LED Power Module...
Click For Info
7W Power LED Modules - Ligitek LG-CB07W-05S3PW-D801, A 7W, warm white power LED array mounted on a star type substrate. With a luminous output of 600lm and viewing angle of 120° this power LED is suitable for a wide range of illuminative applications. Ligitek LG-CB07W-05S3PW-D801 LED Power Module...
Click For Info
Kemo-M156-Sensor-Power-Controller-Dimmer-Kemo-M156-P-This-power-controller-module-is-ideal-for-both-resistive-loads-and-motors-and-can-be-operated-either-via-a-pushbutton-or-a-touch-sensor-contact-P-P-When-the-button-is-pressed-it-automatically-increases-the-power-up-and-down-again-approximately-eve...
Click For Info
With this voltage convertor, an operation of 12 V/DC units is possible at V/DC LKW-or boot battery. Short circuit proof and ruttling safe module.
Click For Info
This LED with soldered constant current electronics may be connected at any voltage between 4â30 V/DC. The LED shines with almost constant brightness and has a consumption of ca.15 mA. An additional protective resistor is not required. The supplied LED can be exchanged for any other LED. It is...
Click For Info
For microphones and many other applications. This module is simply switched between a power amplifier and a weak signal source.
Click For Info
This electronic dimmer switch switches on the lamps or other consumers automatically by means of an in-built relay when twilight falls and switches them again off upon daybreak. The module can also work in reverse i.e. on upon daybreak e.g. for advertising displays, spring fountains etc. and off...
Click For Info
This LED features test clips for inspecting SMD or built-in LEDs in addition to the slots for inserting low-current and standard LEDs. The slots graduate from 2 to 30 mA. The attached test-clip can also be placed in the slots and allows for testing of SMD LEDs or even built-in components required...
Click For Info
This power supply module delivers a stabilised, short-circuit proof and thermally protected output voltage.
Click For Info
IRIS I/O works for monitoring and controlling machines. How all IRIS modules have the IRIS I/O-Module Flags, Timer, Counter can generate and send messages to other units. The messages generated can be received in different parameters along with fixed Text-Strings, e.g Status of I/O, Flags, Timer,...
Click For Info
This LED flasher generates powerful flash pulses which are also visible far away. For every kind of warning, signalling and control display.
Click For Info
Ideal for operating devices with lower voltages from a battery or power supply units.
Click For Info





