Results for lastolite lumen8 radio trigger
Lastolite Lumen8 Radio Trigger
Lastolite Lumen8 Radio Trigger: The Lastolite Lumen8 Radio Trigger can fire Lastolite Lumen8 heads from the camera via a radio signal, removing the need for trailing sync cords. The transmitter fits into a standard hotshoe and the receiver into one of the flash heads via a jack plug.
Lastolite Lumen8 Honeycomb Grid For 7in Reflector
Lastolite Lumen8 Honeycomb Grid For 7in Reflector: The Lastolite Lumen8 Honeycomb Grid is designed to fit into the Lumen8 Standard 7 inch Reflector giving a smaller, more controlled area of softer light.
Lastolite Lumen8 Pneumatic Lighting Stand
Lastolite Lumen8 Pneumatic Lighting Stand: The Lastolite Lumen8 Pneumatic Stand is an air-cushioned lighting stand designed to support Lumen8 (and other makes) Flash Heads. It extends from 85cm to 312cm in height and has metal locking collars for added durability.
Lastolite Lumen8 Barn Door + Gel Set
Lastolite Lumen8 Barn Door + Gel Set: The Lastolite Barn Door and Gel set is designed for use on the Lastolite Lumen8 flash heads via the 7 inch reflector (sold separately). It allows you to control the direction and colour of the light. It is particularly useful for illuminating backgrounds.
Lastolite Lumen8 400w Twin Head Softbox Kit
Lastolite Lumen8 400w Twin Head Softbox Kit: Containing everything you need for the home, studio or location work, the Lastolite Lumen8 twin 400w head lighting kit is great value for money. Offering full control of the power output over 5 stops in 1/10th steps, this kit can be put to a variety of uses, from close up product shots to family portraits. Included in the kit are two 400w flash heads, two wide base lighting stands, two 60x60cm softboxes, two carry cases mains and sync leads.
Lastolite Lumen8 Beautylite Reflector
Lastolite Lumen8 Beautylite Reflector: The Lastolite Lumen8 BeautyLite Reflector is designed to provide a pool of light over a concentrated area, ideal for portraits where a round catch-light in the eye is desirable. Supplied with a soft diffuser cover to soften the effect of the light source.
Lastolite Lumen8 Diffuser + Honeycomb Grid For Beautylite
Lastolite Lumen8 Diffuser + Honeycomb Grid For Beautylite: Designed for use with the Lastolite Lumen8 BeautyLite reflector this Diffuser & Honeycomb Grid offers control over the area and intensity of the light, particularly useful in portrait photography.
Lastolite Lumen8 Modelling Light 100w
Lastolite Lumen8 Modelling Light 100w: Replacement 100w Super Leuci modelling lamp for the Lumen8 200w and 400w flash heads
Flash Wave Iii Radio Trigger/shutter Release Kit
Flash Wave Iii Radio Trigger/shutter Release Kit: The SDMV Flash Wave III is a compact radio slave system for wireless triggering of both speedlite and studio flash units as well as cameras. The Flash Wave III provides sixteen individual radio frequency channels on a 2.4 GHz frequency band. An optional compatible shutter release cable allows you to remotely trigger your camera using a two step test triggering button, enabling you to perform auto focus and shooting functions as well as activating your camera from sleep mode. The Flash Wave III...
Bowens Pulsar Plug-in Radio Trigger Card
Bowens Pulsar Plug-in Radio Trigger Card: Designed exclusively for the Bowens Gemini R range of flash heads, this plug in module will allow you to fire the unit from a Bowens Pulsar Transmitter attached to your camera without the need for trailing sync cords or a bulky receiver being attached to the flash unit. The module plugs into the main body and becomes an integral part of the unit while the included radio antenna plugs into the socket on the side of the flash head.
Lastolite Sync Block For Remote Triggers
Lastolite Sync Block For Remote Triggers: Ideal for photographers who want the benefit of using a radio trigger but do not have a sync connection socket on their flashgun. The new Lastolite sync block (non TTL) simply attaches to the bottom of the flashgun and then the attached sync cable plugs into the remote radio trigger receiver unit. The flashgun can now be fired via the remote radio trigger receiver unit. The Lastolite sync block is compatible with any radio trigger featuring a PC sync/X sync socket.
Lastolite 95cm Lumen8 Pvc Umbrella
Lastolite 95cm Lumen8 Pvc Umbrella: The Lastolite Lumen8 95cmWhite PVC Umbrella (8mm fitting) is designed to complement the Lumen8 Studio Flash system. Light loss is 0.9f stop and colour temperature is 5450K. Please note: this will not fit Elinchrom or Prolinca heads due to the thickness of the umbrella shaft (8mm).
Lastolite 72cm Lumen8 Pvc Umbrella - White
Lastolite 72cm Lumen8 Pvc Umbrella - White: The Lastolite Lumen8 72cmWhite PVC Umbrella (8mm fitting) is designed to complement the Lumen8 Studio Flash system. Light loss is 0.9f stop and colour temperature is 5450°K. Please note: this will not fit Elinchrom or Prolinca heads due to the thickness of the umbrella shaft (8mm)
Lastolite Circular Reflector 1.8m X 1.2m (6\' X 4\') Diffuser (2 ...
Lastolite Circular Reflector 1.8m X 1.2m (6\' X 4\') Diffuser (2 Stops) (7207): Diffusor / Features: Reflector (Light Globe) / Series: Lastolite Lumen8 / Material: Nylon / Dimensions (HxWxD): 1800 x 1200 mm
Flash Wave Iii Radio Receiver Unit
Flash Wave Iii Radio Receiver Unit: The SMDV Flash Wave III Radio Receiver Unit can be added to the Flash Wave III Radio Trigger/Shutter Release Kit to allow the firing of multiple flash units or cameras. The receiver unit uses two standard AA batteries (not included) and is equipped with a built-in hotshoe allowing most hotshoe mounted flashguns to be attached. Contents: 1x Receiver unit, 1x 3.5mm to 3.5mm phone cable and 1x 3.5mm to 6.3mm adapter.
Phottix Laso Ttl Flash Trigger Receiver - Canon
Phottix Laso Ttl Flash Trigger Receiver - Canon: Designed to work with Canon\'s RT Wireless radio flash system, as well as Canon non-radio ETTL flashes, the Phottix Laso Flash Trigger System enables users to control and trigger Canon RT System, radio-enabled flashes. The Laso Receiver works with Canon\'s non-radio ETTL flashes, users can then control and trigger these flashes from different radio devices, including the Phottix Laso Transmitter, Canon ST-E3-RT flash transmitter, and Canon radio-enabled flashes. The Laso Receiver can also be...
Phottix Laso Ttl Flash Trigger Transmitter - Canon
Phottix Laso Ttl Flash Trigger Transmitter - Canon: The Phottix Laso Flash Trigger System allows users to control and trigger Canon radio-enabled flashes, as well as control and trigger Canon\'s non-radio flashes mounted on Laso Receivers. The Laso TTL Flash Trigger Transmitter can control and trigger 5 groups (15 units) of Canon-compatible radio-enabled flashes and supports multiple flash modes, including ETTL II/ETTL, Manual, Multi, Ext. A and Linked Shooting.
Phottix Laso Ttl Flash Trigger Receiver For Canon
Phottix Laso Ttl Flash Trigger Receiver For Canon: The Laso Receiver works with Canon’s non-radio ETTL flashes. Users can control and trigger these flashes from different radio devices, including the Phottix Laso Transmitter, Canon ST-E3-RT flash transmitter, and Canon radio-enabled flashes. The Laso Receiver can also be connected to studio lights, offering the ability to mix hot shoe flashes and studio lights in one triggering system. Wireless Flash Shooting Controlled by Phottix Laso Transmitter, Canon ST-E3-RT, and Canon RT...
Phottix Laso Ttl Flash Trigger Transmitter For Canon
Phottix Laso Ttl Flash Trigger Transmitter For Canon: The Phottix Laso Transmitter can control and trigger 5 groups* (15 units) of Canon-compatible radio-enabled flashes and supports multiple flash modes, including E-TTL II/E-TTL, Manual, MULTI, Ext. A and Linked Shooting. 2.4 GHz frequency 100m range 15 channels with Digital ID AF Assist Light Controls and Triggers Canon-compatible radio-enabled flash Items include: Phottix Laso Transmitter 1 PC Bag 1PC AA Battery 2 PCS USB Cable 1 PC Manual 1 PC Warranty Card 1 PC QC
Lastolite Superwhite Vinyl Background 2.75x6m
Lastolite Superwhite Vinyl Background 2.75x6m: The Lastolite Superwhite ?wipe clean\' vinyl background from Lastolite can be used again and again as all dirty marks can be wiped off at the end of each shoot. The superwhite vinyl background is supplied on a roll and is the same width (2.75m) as Lastolite\'s standard paper backgrounds and 6m long and is compatible with Lastolite\'s heavy duty 1128 background support system. Also available in a 3.7m width.