Results for park oversize adjustable threadless saw guide
The SG-7.2 cutting guide is a specially shaped guide designed specifically to accept aero-shaped seatmasts and seatposts up to 3.5 inches (89 mm) deep The guide can also accept round tubes from 1-1/4 inch to 1-3/4 inch (32 mm to 45 mm) in diameter Two cutting slots are provided one for standard saw...
Click For Info
The SG-7.2 cutting guide is a specially shaped guide designed specifically to accept aero-shaped seatmasts and seatposts up to 3.5 inches (89 mm) deep The guide can also accept round tubes from 1-1/4 inch to 1-3/4 inch (32 mm to 45 mm) in diameter Two cutting slots are provided one for standard saw...
Click For Info
The SG-7.2 cutting guide is a specially shaped guide designed specifically to accept aero-shaped seatmasts and seatposts up to 3.5 inches (89 mm) deep The guide can also accept round tubes from 1-1/4 inch to 1-3/4 inch (32 mm to 45 mm) in diameter Two cutting slots are provided one for standard saw...
Click For Info
The SG-7.2 cutting guide is a specially shaped guide designed specifically to accept aero-shaped seatmasts and seatposts up to 3.5 inches (89 mm) deep The guide can also accept round tubes from 1-1/4 inch to 1-3/4 inch (32 mm to 45 mm) in diameter Two cutting slots are provided one for standard saw...
Click For Info
Park Tool Threadless Saw Guide - Oversize SG7 2Accurately guides a hacksaw to cut aero-shaped seat masts and seat posts up to 2.75\"\" (70mm), as well as fork steerer tubes and other round tubes from 1-1/16\"\" to 1-3/4\"\" (27mm to 45mm). The SG-7.2 features two different cutting slots â...
Click For Info
Park Tool Threadless Saw Guide - SG6The SG-6 Threadless Saw Guide ensures a straight, clean cut on 1\", 1-1/8\", and 1-1 4\" threadless forks. Simply clamp the SG-6 onto the fork and cut, letting the SG-6 guide the hacksaw blade The SG-6âs non scratching composite body incorporates steel...
Click For Info
Park Tool Threadless Saw Guide SG8Specially designed to accommodate wider, carbon specific saw blades, the SG-8 Threadless Saw Guide ensures a straight, clean cut on 1\" (25 4mm), 1-1/8\" (28 6mm) and 1-1.4\" (31 8mm) threadless fork steerer tubes  It also works great when cutting...
Click For Info
The Park Tool SG-8 is specially designed to accommodate wider, carbon specific saw blades, the SG-8 Threadless Saw Guide ensures a straight, clean cut on 1 (25.4mm), 1-1/8 (28.6mm) and 1-1.4 (31.8mm) threadless fork steerer tubes. Also works great when cutting handlebars or other round tubes from...
Click For Info
The Park Tool SG-6 Threadless Saw Guide ensures a straight, clean cut on 1 (25.4mm), 1-1/8 (28.6mm) and 1-1/4 (31.75) threadless fork steerer tubes. Also works great when cutting handlebars or other round tubes from 22mm to 33mm. Simply clamp the SG-6 onto the tube and cut, letting the SG-6 guide...
Click For Info
The Topeak Threadless Saw Guide is an absolute necessity when looking to cut down your steerer tubes, providing an accurate and straight cut you will never look back once you start using this tool! Works on 1, 1-1/8 and 1-1/4 threadless steerer tubes, and includes 2 mm Saw Guide Space for carbon...
Click For Info
The Topeak Threadless Saw Guide Tool, will help you glide through objects, ensure that they are perfectly straight. Not cutting a steer tube perfectly straight could cause issues fitting it back into your bike. The Topeak Threadless Saw Guide provides straight cut on steer tubes. Accommodates...
Click For Info
Threadless Saw Guide provides straight cut on steerer tubes. Accommodates 1" 1-1/8" and1-1/4" treadless steer tubes. Includes 2mm Saw Guide Spacer for carbon saw blades Hardened Steel tool 6.5x3.9x11cm 246g
Click For Info
Threadless Saw Guide provides straight cut on steerer tubes. Accommodates 1" 1-1/8" and1-1/4" treadless steer tubes. Includes 2mm Saw Guide Spacer for carbon saw blades Hardened Steel tool 6.5x3.9x11cm 246g
Click For Info
The Park Tool SGI-7 Saw Guide Insert facilitates accurate cutting of either alloy or carbon handlebars for the WTB PadLoc™ grips.
Click For Info
Cut any threadless fork steerer quickly and accurately with this handy saw guide. Key Features: Cut any threadless fork steerer quickly and accurately with this handy saw guide. You can easily remove as little as 1 mm from the fork steerer length for perfect headset installation and adjustment....
Click For Info
Bike Tool / Suitable for: Bike fork / Material: Steel / Dimensions: 11 x 6, 5 x 3, 9 cm / Weight: 257 g
Click For Info
Park SG7-2 Oversize Adjustable Saw Guide; - The SG-7.2 cutting guide is a specially shaped guide, designed specifically to accept aero-shaped seat masts and seat posts up to 3.5 inches (89 mm) deep - The guide can also accept round tubes from 1-1/4 inch to 1-3/4 inch (32 mm to 45 mm) in diameter -...
Click For Info
Park SG6 Threadless Fork Saw Guide; - Cut any threaded fork steerer quickly and accurately with this handy saw guide - You can easily remove as little as 1 mm from the fork steerer length for perfect headset installation and adjustment - Heat treated for long life - The composite body will not...
Click For Info
The Park Tool SG-7.2 Oversized Adjustable Saw Guide accurately guides a hacksaw to cut aero-shaped seat masts and seat posts up to 2.75 (70mm), as well as fork steerer tubes and other round tubes from 1-1/16 to 1-3/4 (27mm to 45mm). The SG-7.2 features two different cutting slots, standard and...
Click For Info
Park Tool Deluxe Threadless Nut Setter TNS4As a manufacturer of bicycle specific tools since 1963 you can safely rely on Park Tools\' many years of experience. The world\'s largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world Features:The...
Click For Info
Cut any threaded 1-1/8 fork quickly and easily with these handy fork stack cutting guides. The Park Tool SG-2 Threaded Saw Guide is heat treated for long life, each guide cleans the freshly cut threads upon removal so headset parts install easily. Cut as little as 1mm from any fork. Threads are in...
Click For Info
Park SG2 Saw Guide 1 1/8 x 26 tpi; - Cut any threaded fork steerer quickly and accurately with this handy saw guide - You can easily remove as little as 1 mm from the fork steerer length for perfect headset installation and adjustment - Heat treated for long life - Freshly cut threads are cleaned...
Click For Info
Nobex-505-Magnetic-Saw-Guide-Nobex-50502-Accurate-sawing-is-made-simple-with-the-505-magnetic-saw-guide-from-Nobex-This-guide-holds-the-saw-in-place-with-three-magnets-and-two-lugs-on-the-body-to-locate-the-guide-against-the-face-edge-of-the-timber-to-be-cut-The-body-of-the-guide-can-be-held-in-one-...
Click For Info
DeWalt DWS Plunge Saw Guide Rails and Accessories - Dewalt DWS5021-XJ, This 1m plunge saw guide rail from DeWalt has been designed for use with DeWalt DWS520 plunge saws. DeWalt DWS5021-XJ Plunge Saw Guide Rail 1m
Click For Info
DeWalt DWS Plunge Saw Guide Rails and Accessories - Dewalt DWS5022-XJ, This 1.5m plunge saw guide rail from DeWalt has been designed for use with DeWalt DWS520 plunge saws. DeWalt DWS5022-XJ Plunge Saw Guide Rail 1.5m
Click For Info
DeWalt DWS Plunge Saw Guide Rails and Accessories - Dewalt DWS5023-XJ, This 2.6m plunge saw guide rail from DeWalt has been designed for use with DeWalt DWS520 plunge saws. DeWalt DWS5023-XJ Plunge Saw Guide Rail 2.6m
Click For Info
DeWalt DWS Plunge Saw Guide Rails and Accessories - Dewalt DWS5025-XJ, This plunge saw guide rail bagfrom DeWalt has been designed for use with1m and 1.5m DeWalt guide rails. DeWalt DWS5025-XJ Plunge Saw Guide Rail Bag
Click For Info
Bosch Circular Saws Guide Rails and Accessories - Bosch 1608000114, Circular saw guide rail sliding shoe from Bosch, suitable for use with GKS 55 (0 601 567 1..); GKS 65 (0 601 568 1..) and GKS 66 CE (0 601 568 7..) Professional. Bosch 1608000114 Circular Saw Guide Rail Sliding Shoe
Click For Info
Bosch Circular Saws Guide Rails and Accessories - Bosch 2607001375, Bosch guide rail adaptor suitable GKS 190 circular saw. Bosch 2607001375 Circular Saw Guide Rail Adaptor
Click For Info
Bosch Circular Saws Guide Rails and Accessories - Bosch 2602317030, Bosch circular saw guide rail FSN 70, 700mm long, pair of G-clamps not included, suitable GKS 18 V, GKS 24 V, GKS 55, GKS 55 CE, GKS 65, GKS 65 CE, GKS 66 CE, GKS 68 B, GKS 68 BC, GKS 85, GMF 1400 CE, GOF 900 CE, GOF 1300 CE, GOF...
Click For Info
X-Tools Saw Guide The X-Tools Saw Guide willl give you a perfectly square cut time after time. A simple yet highly efficient way of getting the exact cut you require. Buy X-Tools Products from Chain Reaction Cycles, the Worldâs Largest Online Bike Store.
Click For Info
Bosch Circular Saws Guide Rails and Accessories - Bosch 2608000426, Bosch G-clamps FSN 70, FSN 140 circular saw guides. Pack of 2. Bosch 2608000426 Circular Saw Guide G-clamps FSN 70/FSN 140 2-pack
Click For Info
Ideal for DIY and trade use, this 550mm saw guide helps to produce straight, accurate cuts with minimum effort and an excellent level of consistency. Simply clamp the guide to the workpiece with the supplied clamp then use your butt jigsaw or router against the rule edge to produce a brilliant cut....
Click For Info
Park Tool Adjustable Pin Spanner SPA6As a manufacturer of bicycle specific tools since 1963 you can safely rely on Park Tools\' many years of experience. The world\'s largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world Features:This spanner...
Click For Info
Park Tool Adjustable Wrench PAW12Big and powerful, the PAW-12 adjustable wrench is forged from carbon steel and chrome plated Features:Jaws open to 36mm Comfortable vinyl dipped handle Features a laser engraved measurement scaleBuy Park Tool Workshop Tools from Chain Reaction Cycles, the...
Click For Info
Park SPA6C Adjustable Pin Spanner; - Heavy duty adjustable peg spanner - Replaceable hardened pins - Adjustable size fits most bottom bracket cups
Click For Info
Cut any threadless fork steerer quickly and accurately with this handy saw guideYou can easily remove as little as 1 mm from the fork steerer length for perfect headset installation and adjustmentHeat treated for long lifeThe composite body will not damage the fork's steerer, but has steel threads...
Click For Info
Cut any threadless fork steerer quickly and accurately with this handy saw guideYou can easily remove as little as 1 mm from the fork steerer length for perfect headset installation and adjustmentHeat treated for long lifeThe composite body will not damage the fork's steerer, but has steel threads...
Click For Info
The TNS-15 makes it quick and easy to install star-fangled nuts used with 1.5 and 1-1/4 inch threadless headset systemsUsing a durable steel driver and built-in guide, the TNS-15 perfectly aligns the star-fangled nut and sets it to the proper depth every timeThe unique design virtually eliminates...
Click For Info
The TNS-15 makes it quick and easy to install star-fangled nuts used with 1.5 and 1-1/4 inch threadless headset systemsUsing a durable steel driver and built-in guide, the TNS-15 perfectly aligns the star-fangled nut and sets it to the proper depth every timeThe unique design virtually eliminates...
Click For Info