Results for pentax cs 205 remote release cable
Pentax Cs-205 Remote Release Cable
Pentax Cs-205 Remote Release Cable: Remote control release for MZ-6 and *ist AF SLRs including the K5 II and K10D. Plugs into the camera and has a finger trigger release at the other end of a 50cm cable. Ideal for low light and nature photography when the camera is mounted on a tripod.
Remote Release Cable For Sw130 Towable Spreader
Remote Release Cable For Sw130 Towable Spreader: Mounts to a vehicle for easy salt spreading over large areas
Shutter Release Cable For Canon E3 Type Remote
Shutter Release Cable For Canon E3 Type Remote: Shutter release cable adapter for use with the Trigger Smart motion capture release system and Canon cameras using the E3 type remote control connection including the EOS 30, 33, 50, 300D / 350D / 400D / 450D / 1000D / 500D / 550D cameras. This remote will also work with Contax N, 645, and Pentax K110D, K100D, K200D, K10D, K20D, ist DS, DS2, DL2, DL, D.
Pocketwizard S-rms1am-acc-1 Remote Accessory Cable
Pocketwizard S-rms1am-acc-1 Remote Accessory Cable: The PocketWizard S-RMS1AM-ACC-1 Remote Accessory Cable is a 30cm cable used to connect a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Sony or Minolta remote shutter release terminal and acting as a pre-trigger cable. A Pre-Trigger cable controls both the half-press and full-press function of your camera\'s shutter release. When a camera is ?pre-triggered\', it is like holding your camera\'s shutter release button in the half-pressed or metering/focusing position. MSMM stereo to mono...
Pocketwizard S-rms1am-acc Electronic Shutter Release Cable
Pocketwizard S-rms1am-acc Electronic Shutter Release Cable: The PocketWizard S-RMS1AM-P Electronic Shutter Release Cable allows remote operation of Sony or Minolta cameras that utilise the RMS1AM electronic cable release connection from a PocketWizard Plus III, TT5 or MultiMAX transmitter. Toggle Pre-Trigger on and off remotely with the MultiMAX. Required for remote camera triggering with a FlexTT5 if using E-TTL functions. NOTE: An older mono motor drive cable and/or pre-release cable can be used instead of an -ACC cable with a FlexTT5 but you will...
Pocketwizard N10-acc-1 Remote Accessory Cable
Pocketwizard N10-acc-1 Remote Accessory Cable: The PocketWizard N10-ACC-1 Remote Accessory cable is a 30cm cable for connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Nikon 10-Pin Remote Shutter Terminal remote terminal and acting as a pre-trigger cable. A Pre-Trigger cable controls both the half-press and full-press function of your camera\'s shutter release. When a camera is \'pre-triggered\', it is like holding your camera\'s shutter release button in the half-pressed or metering/focusing position. MSMM stereo to mono...
Pocketwizard Cm-e3-acc-1 Remote Accessory Cable
Pocketwizard Cm-e3-acc-1 Remote Accessory Cable: The PocketWizard CM-E3-ACC-1 Remote Accessory Cable is a 30cm cable for connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Canon E3 remote terminal or sub miniphone (3/32\" or 2.5 mm) and acting as a pre-trigger cable. A Pre-Trigger cable controls both the half-press and full-press function of your camera\'s shutter release. When a camera is \'pre-triggered\', it is like holding your camera\'s shutter release button in the half-pressed or metering/focusing position. MSMM stereo...
Pocketwizard Nmcdc2-acc-1 Remote Accessory Cable
Pocketwizard Nmcdc2-acc-1 Remote Accessory Cable: The PocketWizard NMCDC2-ACC-1 Remote Accessory Cable is a 30cm cable for connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Nikon MC-DC2 remote terminal and acting as a pre-trigger cable. A Pre-Trigger cable controls both the half-press and full-press function of your camera\'s shutter release. When a camera is \'pre-triggered\', it is like holding your camera\'s shutter release button in the half-pressed or metering/focusing position. MSMM stereo to mono miniphone adapter...
Hama Dccs System Base Wireless Remote Release
Hama Dccs System Base Wireless Remote Release: The Hama DCCS System Base Wireless Remote Release is designed to act fast so you don\'t miss a moment. The Hama Wireless Remote Release comprises of a transmitter and a receiver and is quickly and easily connected to the camera using the correct cable (not included). Separate connection cables are available for all common camera brands with remote control, and are interchangeable so that the release base has compatibility with a huge range of cameras. With 2-stage shutter release button...
Fuji Rr-90 Remote Release
Fuji Rr-90 Remote Release: The Fuji RR-90 Remote Release is a remote shutter release for Fuji X-M1 digital camera. The release plugs into the camera and allows you to operate the shutter remotely, via the 80cm cable. It\'s ideal when operating from a tripod or when using longer exposures, negating camera wobble.
Hama Timer Remote Release Dcc System Base
Hama Timer Remote Release Dcc System Base: Capture the moment with the Hama Timer Remote Release DCC (Digital Camera Connecting) System Base. With this Remote you can capture a beautiful flower coming into bloom over the course of an entire day. Acting as a base, the Hama timer remote release is quickly and easily connected to the camera using the corresponding cable connection (not included, available separately - see accessories tab). The timer itself allows automatic as well as manual shots (single and continuous) with use of the...
Shutter Release Cable For Canon N3 Type Remote
Shutter Release Cable For Canon N3 Type Remote: Shutter release cable adapter for use with the Trigger Smart motion capture release system and Canon cameras using the N3 type remote control connection including the EOS 1V, 3, 1D, 1Ds, 1Ds Mark II, 1D Mark II, 1Ds Mark III, 1D Mark IV, 10D, 20D, 30D, 40D, 50D, 5D, 5D Mark II, 5D MarkIII and 7D cameras.
Shutter Release Cable For Nikon Mc-dc1 Type Remote
Shutter Release Cable For Nikon Mc-dc1 Type Remote: Shutter release cable adapter for use with the Trigger Smart motion capture system and Nikon cameras using the MC-DC1 remote control connection including the D70s and D80 cameras.
Shutter Release Cable For Nikon Mc-dc2 Type Remote
Shutter Release Cable For Nikon Mc-dc2 Type Remote: Shutter release cable adapter for use with the Trigger Smart motion capture system and Nikon cameras using the MC-DC2 remote control connection including the D90, D5000 and D7000 cameras.
Shutter Release Cable For Nikon 10 Pin Type Remote
Shutter Release Cable For Nikon 10 Pin Type Remote: Shutter release cable adapter for use with the Trigger Smart motion capture system and Nikon cameras using the 10-pin remote control connection including the N90s, F5, F6, F100, F90X, D1, D1H, D1X, D2, D3, D3x, D2Hs, D2X, D2Xs, D200, D300, D300s, D700 and Kodak DSC-14N, Fuji S3 Pro and S5 Pro cameras.
Olympus Fs-rg1 Remote Grip Cable
Olympus Fs-rg1 Remote Grip Cable: The Olympus FS-RG1 Remote Grip Cable connects Olympus Digital SLRs and the FP-1 flash power grip. This remote grip cable allows the shutter button on the FP-1 to be used as a shutter release.
Hama Dccs System Base Ir Remote Release With Photoelectric Detector
Hama Dccs System Base Ir Remote Release With Photoelectric Detector: The Hama DCCS System Base IR Remote Release with Photoelectric Detector works by moving an object/subject which breaks through the photoelectric detector and therefore triggers the camera. The Photoelectric Detector is perfect for sports, wildlife, and party photos. The receiver (with cable on camera hotshoe) and transmitter need to be placed opposite each other, up to 5 metres away, to gain the photoelectric signal. Interchangeable camera connections, remote triggers and extension cables are...
Shutter Release Cable For Olympus
Shutter Release Cable For Olympus: Shutter release cable adapter for use with the Trigger Smart motion capture system and Olympus cameras using the wired remote control connection including the E520, E510, E420, E410, E400, SP-570 UZ, SP-560 UZ, SP-550 UZ and SP-510 UZ cameras.
Enlight Photo Ioshutter Release Cable For Canon E3 - Enl-sht1-cmj
Enlight Photo Ioshutter Release Cable For Canon E3 - Enl-sht1-cmj: The ioShutter Release Cable allows you to control your Canon DSLR camera that utilises the E3 plug in remote option from your iPhone, iPad or iPod Touch (see further details for compatibility) simply download the free app from the App Store. Options include single shutter button operation, continuous shooting, timer control, bulb lock, timelapse and sound \'ClapToSnap\' or movement \'ShakeToTake\' activation. A Pro version of the app is available to purchase extending the features and functionality.
Hahnel Mechanical Shutter Release Cable
Hahnel Mechanical Shutter Release Cable: This high-quality mechanical shutter release cable from Hahnel is 40cm long with a high-quality fabric sleeve and chrome-plated wheel lock. Ideal for eliminating camera shake, and suitable for continuous shooting, this release cable has a standard sized fitting compatible with any camera with a threaded cable release socket.