Results for phottix ares receiver unit
Phottix Ares Receiver Unit is an addition to the Trigger and Receiver Set allowing you to control additional light sources from the camera position.
Click For Info
The Phottix Ares II is a budget-friendly flash trigger system which is perfect for manual shooting with studio lights or hot shoe flashes. Whereas the popular original Phottix Ares system was a standalone product but this is not so for the Ares II, which ensures compatibility with other Phottix...
Click For Info
The Phottix Ares II is a budget-friendly flash trigger system which is perfect for manual shooting with studio lights or hot shoe flashes. Whereas the popular original Phottix Ares system was a standalone product but this is not so for the Ares II, which ensures compatibility with other Phottix...
Click For Info
This additional receiver unit is for use with the Canon dedicated Phottix Strato II Wireless Trigger Set, enabling you to trigger additional heads or flashguns and hence adding a further layer of control and creativity to your work.
Click For Info
This additional receiver unit is for use with the Nikon dedicated Phottix Strato II Wireless Trigger Set, enabling you to trigger additional heads or flashguns and hence adding a further layer of control and creativity to your work.
Click For Info
The SMDV Flash Wave III Radio Receiver Unit can be added to the Flash Wave III Radio Trigger/Shutter Release Kit to allow the firing of multiple flash units or cameras. The receiver unit uses two standard AA batteries (not included) and is equipped with a built-in hotshoe allowing most hotshoe...
Click For Info
The Hahnel Viper Wireless Flash Trigger Receiver Unit is designed for use with the Hahnel Viper Wireless Flash Trigger transmitter. This additional receiver unit will allow you to control multiple flash set ups. The Viper transmitter can control an unlimited number of receiver units.
Click For Info
This radio system deserves mention because of the improved selectivity and very high range of up to 300 metres. A remote controlled device can be securely telecommanded with a security code transmission. This is ideal for alarm systems. Maximum receiver switching power of 250 V/AC, 16 A For...
Click For Info
This radio system deserves to be mentioned because of the improved selectivity and very high range of up to 300 metres. A remote controlled device can be securely telecommanded with a security code transmission. This is ideal for alarm systems. Maximum receiver switching power of 250 V/AC, 16 A For...
Click For Info
The Phottix Strato TTL Wireless Flash Receiver for Nikon is designed for use with the Nikon dedicated Strato TTL Trigger allowing the triggering of more than one flashgun at a time. The Phottix Strato receiver powers on 2x AA alkaline or rechargeable batteries (not included, available separately).
Click For Info
The Phottix Strato TTL Wireless Flash Receiver for Canon is designed for use with the Canon dedicated Strato TTL Trigger allowing the triggering of more than one flashgun at a time. The Phottix Strato receiver powers on 2x AA alkaline or rechargeable batteries (not included, available separately).
Click For Info
This Odin transmitter enables the wireless control and triggering of Canon flashes and the Phottix Mitros+ from up to 100m. A receiver unit is also required, available separately, or as part of a Tx/Rx kit.
Click For Info
This Odin transmitter enables the wireless control and triggering of Nikon flashes and the Phottix Mitros+ from up to 100m. A receiver unit is also required, available separately, or as part of a Tx/Rx kit.
Click For Info
The STUTPEALRGB is the receiver unit utilized by the STUTPEAGB VGA and audio over Cat 5 extension series. This convenient video distribution system simplifies implementing digital signage solutions by allowing a single VGA source and corresponding audio to be broadcast to multiple displays at up to...
Click For Info
When used with the Pro-Flash Transmitter, this receiver unit can be used to trigger the Pro-Flash TLI-C/TLI-N Flashgun wirelessly from up to 50m (165 feet) away. The receiver plugs into the Wireless Control Port on the side of the unit and does not require batteries. The receiver operates over 16...
Click For Info
The ST121RGB VGA over Cat5 video extender receiver is specifically designed for use as the receiver unit to the StarTech.com ST1214TGB 4 port VGA over Cat5 UTP Extender transmitter, allowing you to split and extend a single VGA source to up to four remote displays. From the transmitter device, the...
Click For Info
The ST121RGB VGA over Cat5 video extender receiver is specifically designed for use as the receiver unit to the StarTech.com ST1214TGB 4 port VGA over Cat5 UTP Extender transmitter, allowing you to split and extend a single VGA source to up to four remote displays. From the transmitter device, the...
Click For Info
The ST121RGB VGA over Cat5 video extender receiver is specifically designed for use as the receiver unit to the StarTech.com ST1214TGB 4 port VGA over Cat5 UTP Extender transmitter, allowing you to split and extend a single VGA source to up to four remote displays. From the transmitter device, the...
Click For Info
Extend and Distribute a VGA Signal to a Remote Display over Cat5 Cabling (Receiver Only). The STUTPRXLGB VGA Video Extender Remote Receiver over Cat 5 (UTPE Series) can be installed with the StarTech.com 4 port, 8 port or wall-plate VGA over Cat 5 extenders (ST124UTPE / ST128UTPE), enabling remote...
Click For Info
The STUTPEALRGB VGA Video Extender over Cat 5 Remote Receiver with Audio is the receiver unit utilized by our STUTPEAGB VGA and Audio over Cat 5 extension series. This convenient video distribution system simplifies the ...
Click For Info
The STHDBTRX works with the ST424HDBT HDMI matrix switch to extend an HDMI audio/video source up to 230ft (70m) over Cat5e/6 cabling. One STHDBTRX receiver unit is required for each individual remote display. Together with the ST424HDBT, the CAT5 HDMI receiver works to create a digital signage...
Click For Info
The STHDBTRX works with the ST424HDBT HDMI matrix switch to extend an HDMI audio/video source up to 230ft (70m) over Cat5e/6 cabling. One STHDBTRX receiver unit is required for each individual remote display. Together with the ST424HDBT, the CAT5 HDMI receiver works to create a digital signage...
Click For Info
This shoe adapter is used to attach a URX-P03 wireless microphone receiver unit onto camcorders or cameras with a Sony MI (Multi-Interface) shoe, enabling power operation via the camera, removing the need for an attaching audio cable and sharing the camera\'s power with the receiver.
Click For Info
This is an auxilliary receiver unit designed to work with the INT412 Single Channel Transmitter and INT492 4 Channel Transmitter, allowing more than one flash head to be fired simultaneously.
Click For Info
Designed to work with Canon\'s RT Wireless radio flash system, as well as Canon non-radio ETTL flashes, the Phottix Laso Flash Trigger System enables users to control and trigger Canon RT System, radio-enabled flashes. The Laso Receiver works with Canon\'s non-radio ETTL flashes, users can then...
Click For Info
The Laso Receiver works with Canon’s non-radio ETTL flashes. Users can control and trigger these flashes from different radio devices, including the Phottix Laso Transmitter, Canon ST-E3-RT flash transmitter, and Canon radio-enabled flashes. The Laso Receiver can also be connected to studio...
Click For Info
Originally announced at Photokina 2014, the Phottix Odin II TTL Flash system offers sophisticated control, with five groups, 32 channels, TTL power control, high speed sync and second curtain sync with compatible cameras. Whatever you need your flash setup to do, Phottix Odin can accommodate. This...
Click For Info
Originally announced at Photokina 2014, the Phottix Odin II TTL Flash system offers an unprecedented degree of sophisticated flash control. With five groups, 32 channels, TTL power control, high speed sync and second curtain sync with compatible cameras, Phottix Odin is the flash system that power...
Click For Info
Replacement flash tube for Phottix Indra500 TTL Monolights. Committed to cutting-edge innovation and excellence in photographic accessories. The Phottix track record speaks for itself. Holder of 40 patents, Phottix achieved acclaim for its award-winning Phottix Odin TTL Flash Trigger - the first...
Click For Info
The Phottix Strato 4 in 1 Wireless Trigger - Broaden your horizons, Take your flash off the camera. The 4-channel, 2.4 GHz transmitter and receiver units boast ranges of 100 meters and beyond. Running on widely available AA batteries, the small footprint transmitter/receiver system is a must for...
Click For Info
It is for circular reflectors, with ball head and light stand mount. Committed to cutting-edge innovation and excellence in photographic accessories. The Phottix track record speaks for itself. Holder of 40 patents, Phottix achieved acclaim for its award-winning Phottix Odin TTL Flash Trigger - the...
Click For Info
A great flash photography kit, based around the Phottix Mitros+: A feature-heavy flashgun with integral receiver/transmitter and a GN of 58. The kit also includes an 84cm reflective umbrella, an 84cm white diffuser umbrella, a Phottix Varos II multi-function flash shoe umbrella holder, a 190cm...
Click For Info
A great flash photography kit, based around the Phottix Mitros+: A feature-heavy flashgun with integral receiver/transmitter and a GN of 58. The kit also includes an 84cm reflective umbrella, an 84cm white diffuser umbrella, a Phottix Varos II multi-function flash shoe umbrella holder, a 190cm...
Click For Info
The Odin II adds new cutting-edge functionality and features to Phottix\'s flagship flash trigger. The Odin II UI and control system has been overhauled making it faster and easier to use. It features 5 groups with individual buttons and a control dial for quickly adjusting flash power levels. An...
Click For Info
The Phottix Mitros+ TTL Transceiver Flash is the premier model in the already impressive Mitros range ? a feature-heavy flashgun with integral flash triggers: An Odin transmitter/receiver and Strato receiver. With full E-TTL I/II compatibility, built-in IR triggering (with both Master and Slave...
Click For Info
The Phottix Mitros+ TTL Transceiver Flash is the premier model in the already impressive Mitros range - a feature-heavy flashgun with integral flash triggers: An Odin transmitter/receiver and Strato receiver. With full D-TTL compatibility, built-in IR triggering (with both Master and Slave modes),...
Click For Info
The Phottix Mitros+ TTL Transceiver Flash is the premier model in the already impressive Mitros range - a feature-heavy flashgun with integral flash triggers: An Odin transmitter/receiver and Strato receiver. With full D-TTL compatibility, built-in IR triggering (with both Master and Slave modes),...
Click For Info
Receiver for the Strato II Multi 5-in-1 Wireless Trigger System for Nikon. Making a classic trigger better! The Phottix Strato II Multi 5-in-1 Wireless Trigger System gives photographers incredible control over their flashes and studio lights. Four channels and four groups provide unparalleled...
Click For Info
Receiver for the Strato II Multi 5-in-1 Wireless Trigger System for Canon. Making a classic trigger better! The Phottix Strato II Multi 5-in-1 Wireless Trigger System gives photographers incredible control over their flashes and studio lights. Four channels and four groups provide unparalleled...
Click For Info
