Results for rvfm retort stand ring 50mm
Rvfm Retort Stand Ring 50mm
Rvfm Retort Stand Ring 50mm: Retort Stand Rings - RVFM CH0672A, The RVFM Retort Stand Ring 50mm is a base support ring for retorts and other round bottomed flasks. RVFM Retort Stand Ring 50mm
Rvfm Retort Stand Ring 75mm
Rvfm Retort Stand Ring 75mm: Retort Stand Rings - RVFM CH0672B, The RVFM Retort Stand Ring 75mm is a base support ring for retorts and other round bottomed flasks. RVFM Retort Stand Ring 75mm
Rvfm Laboratory Retort Stand Set
Rvfm Laboratory Retort Stand Set: RVFM Laboratory Retort Stand, Clamp and Bosshead Kit - RVFM KIT, Laboratory retort stand set - essential equipment for all science labs. The set comprises 1 each of retort stand base, rod, clamp and bosshead. RVFM Laboratory Retort Stand Set
Rvfm Base Retort Stand 200 X 125mm
Rvfm Base Retort Stand 200 X 125mm: Steel Retort Stand Bases - RVFM CH12322/3, A 200 x 125mm retort stand base for use with a retort stand rod, etc. RVFM Base Retort Stand 200 x 125mm
Rvfm Base Retort Stand 250 X 160mm
Rvfm Base Retort Stand 250 X 160mm: Steel Retort Stand Bases - RVFM CH12322/5, A 250 x 160mm retort stand base for use with a retort stand rod, etc. RVFM Base Retort Stand 250 x 160mm
Rvfm Base Retort Stand 160 X 100mm
Rvfm Base Retort Stand 160 X 100mm: Steel Retort Stand Bases - RVFM CH12322/1, A 160 x 100mm retort stand base for use with a retort stand rod, etc. RVFM Base Retort Stand 160 x 100mm
Rvfm Retort Clamp 3 Prong Rubber Jaws
Rvfm Retort Clamp 3 Prong Rubber Jaws: RVFM Laboratory Retort Stand, Clamp and Bosshead Kit - RVFM CLMP3P, This Retort Clamp 3 Prong forms part of the Laboratory Retort Stand Kit (52-0136), and is essential equipment for all science labs. RVFM Retort Clamp 3 Prong Rubber Jaws
Rvfm Aluminium Retort Stand Clamp 4 Prongs
Rvfm Aluminium Retort Stand Clamp 4 Prongs: Retort-Stand-Clamp-4-Prong-RVFM-CH12340-This-universal-retort-stand-clamp-is-made-from-aluminium-and-has-4-jaws-RVFM-Aluminium-Retort-Stand-Clamp-4-Prongs
Rvfm Nesting Retort Stand Rod (700x10mm) And Base (length 200mm)
Rvfm Nesting Retort Stand Rod (700x10mm) And Base (length 200mm): Nesting-Retort-Stand-Rod-and-Base-RVFM-C02001-These-retort-stands-have-a-cast-iron-base-and-fit-together-for-ease-of-storage-These-A-shaped-bases-have-a-tapped-hole-to-accept-the-support-rod-RVFM-Nesting-Retort-Stand-Rod-700x10mm-and-Base-length-200mm-
Rvfm Economy Retort Stand, 200 X 125mm
Rvfm Economy Retort Stand, 200 X 125mm: Economy Retort Stands - RVFM CS2880/4, This economical retort stand has a 200 x 125mm base made from enamel finished steel. The 12mm plated-steel rod screws into the base and can therefore be removed for easier storage. RVFM Economy Retort Stand, 200 x 125mm
Rvfm Economy Retort Stand, 225 X 150mm
Rvfm Economy Retort Stand, 225 X 150mm: Economy Retort Stands - RVFM CS2880/5, This economical retort stand has a 225 x 150mm base made from enamel finished steel. The 12mm plated-steel rod screws into the base and can therefore be removed for easier storage. RVFM Economy Retort Stand, 225 x 150mm
Rvfm Retort Rod Ni/cr Steel L500 X 10mm
Rvfm Retort Rod Ni/cr Steel L500 X 10mm: RVFM Rods for Retort Stands - RVFM C02051A-1, This retort rod has been manufactured using Ni/Cr plated steel and is used in conjunction with a retort stand base. RVFM Retort Rod Ni/Cr steel L500 x 10mm
Rvfm Retort Rod Stainless Steel L500 X 10mm
Rvfm Retort Rod Stainless Steel L500 X 10mm: RVFM Rods for Retort Stands - RVFM C02051-1, This retort rod has been manufactured using stainless steel and is used in conjunction with a retort stand. The rod can be attached to a clamp for numerous experiments and fits inside most fume hoods. RVFM Retort Rod Stainless Steel L500 x 10mm
Rvfm Retort Clamp Cork Jaws And Bosshead
Rvfm Retort Clamp Cork Jaws And Bosshead: Retort-Clamps-RVFM-CH0687-A-robust-4-finger-retort-clamp-with-cork-jaw-inserts-and-built-in-bosshead-The-cork-lining-of-the-clamp-provides-a-non-slip-soft-grip-ideal-for-holding-test-tubes-flasks-and-other-glassware-RVFM-Retort-Clamp-Cork-Jaws-and-Bosshead
Rvfm Retort Clamp Rubber Jaws And Bosshead
Rvfm Retort Clamp Rubber Jaws And Bosshead: Retort-Clamp-With-Rubber-Jaws-and-Bosshead-RVFM-CH0688-A-robust-retort-clamp-with-rubber-jaws-and-built-in-bosshead-RVFM-Retort-Clamp-Rubber-Jaws-and-Bosshead
Rvfm Pipe Clay Triangle 50mm
Rvfm Pipe Clay Triangle 50mm: Pipe-Clay-Triangle-RVFM-GL02004-A-pipe-clay-triangle-for-supporting-laboratory-items-being-heated-by-a-Bunsen-burner-or-other-heat-source-It-is-made-of-wires-strung-in-an-equilateral-triangle-with-three-50mm-long-hollow-ceramic-tubes-The-triangle-is-usually-supported-on-a-tripod-or-iron-ring-and-in-turn-supports-a-crucible-etc-allowing-it-to-be-directly-heated-by-the-flame-RVFM-Pipe-Clay-Triangle-50mm
Rvfm Pipe Clay Triangle 50mm
Rvfm Pipe Clay Triangle 50mm: Pipe-Clay-Triangles-RVFM-C530B-The-RVFM-Pipe-Clay-Triangle-50mm-is-ideal-for-chemistry-experiments-RVFM-Pipe-Clay-Triangle-50mm
Rvfm Concave Glass Mirrors 50mm Diameter (pack Of 10)
Rvfm Concave Glass Mirrors 50mm Diameter (pack Of 10): RVFM Plane and Concave Mirrors - RVFM PH0520C/20, These Concave Glass Mirrors are ideal for reflection and symmetry work, light and science projects. RVFM Concave Glass Mirrors 50mm Diameter (Pack of 10)
Rvfm Tripod Stand
Rvfm Tripod Stand: Spirit Burner Lamp and Tripod - RVFM CH0643, The RVFM tripod stand has been designed for use with the RVFM spirit burner. RVFM Tripod Stand
Rvfm Monocular Biological Microscope 50mm Dia. Mirror
Rvfm Monocular Biological Microscope 50mm Dia. Mirror: Monocular-Biological-Microscope-RVFM-601-319-This-microscope-is-suitable-for-primary-school-right-up-to-university-level-RVFM-Monocular-Biological-Microscope-50mm-Dia-Mirror