Results for phottix ares receiver unit

12345678910Next

Phottix Ares Receiver Unit

Phottix Ares Receiver Unit

Phottix Ares Receiver Unit: Phottix Ares Receiver Unit is an addition to the Trigger and Receiver Set allowing you to control additional light sources from the camera position.

Phottix Ares II Flash Trigger Receiver

Phottix Ares Ii Flash Trigger Receiver

Phottix Ares Ii Flash Trigger Receiver: The Phottix Ares II is a budget-friendly flash trigger system which is perfect for manual shooting with studio lights or hot shoe flashes. Whereas the popular original Phottix Ares system was a standalone product but this is not so for the Ares II, which ensures compatibility with other Phottix products.

Phottix Ares II Flash Trigger Transmitter

Phottix Ares Ii Flash Trigger Transmitter

Phottix Ares Ii Flash Trigger Transmitter: The Phottix Ares II is a budget-friendly flash trigger system which is perfect for manual shooting with studio lights or hot shoe flashes. Whereas the popular original Phottix Ares system was a standalone product but this is not so for the Ares II, which ensures compatibility with other Phottix products.

Phottix Strato II Receiver Unit - Canon

Phottix Strato Ii Receiver Unit - Canon

Phottix Strato Ii Receiver Unit - Canon: This additional receiver unit is for use with the Canon dedicated Phottix Strato II Wireless Trigger Set, enabling you to trigger additional heads or flashguns and hence adding a further layer of control and creativity to your work.

Phottix Strato II Receiver Unit - Nikon

Phottix Strato Ii Receiver Unit - Nikon

Phottix Strato Ii Receiver Unit - Nikon: This additional receiver unit is for use with the Nikon dedicated Phottix Strato II Wireless Trigger Set, enabling you to trigger additional heads or flashguns and hence adding a further layer of control and creativity to your work.

Flash Wave III Radio Receiver Unit

Flash Wave Iii Radio Receiver Unit

Flash Wave Iii Radio Receiver Unit: The SMDV Flash Wave III Radio Receiver Unit can be added to the Flash Wave III Radio Trigger/Shutter Release Kit to allow the firing of multiple flash units or cameras. The receiver unit uses two standard AA batteries (not included) and is equipped with a built-in hotshoe allowing most hotshoe mounted flashguns to be attached. Contents: 1x Receiver unit, 1x 3.5mm to 3.5mm phone cable and 1x 3.5mm to 6.3mm adapter.

Hahnel Viper Wireless Flash Trigger Receiver Unit - Canon

Hahnel Viper Wireless Flash Trigger Receiver Unit - Canon

Hahnel Viper Wireless Flash Trigger Receiver Unit - Canon: The Hahnel Viper Wireless Flash Trigger Receiver Unit is designed for use with the Hahnel Viper Wireless Flash Trigger transmitter. This additional receiver unit will allow you to control multiple flash set ups. The Viper transmitter can control an unlimited number of receiver units.

QuadroCopter Receiver unit Reely (206905) 1 pc(s)

Quadrocopter Receiver Unit Reely (206905) 1 Pc(s)

Quadrocopter Receiver Unit Reely (206905) 1 Pc(s): High quality Beta 4 FM Receiver with buzzing signal output

H-Tronic 1-channel Receiver Unit Component

H-tronic 1-channel Receiver Unit Component

H-tronic 1-channel Receiver Unit Component: This radio system deserves mention because of the improved selectivity and very high range of up to 300 metres. A remote controlled device can be securely telecommanded with a security code transmission. This is ideal for alarm systems. Maximum receiver switching power of 250 V/AC, 16 A For long-life the transmitter has 2 x CR2032 batteries (please order separately).

H-Tronic 8-channel Receiver Unit Component

H-tronic 8-channel Receiver Unit Component

H-tronic 8-channel Receiver Unit Component: This radio system deserves to be mentioned because of the improved selectivity and very high range of up to 300 metres. A remote controlled device can be securely telecommanded with a security code transmission. This is ideal for alarm systems. Maximum receiver switching power of 250 V/AC, 16 A For long-life the transmitter has 2 x CR2032 batteries (please order separately).

Phottix Strato TTL Wireless Flash Receiver - Nikon

Phottix Strato Ttl Wireless Flash Receiver - Nikon

Phottix Strato Ttl Wireless Flash Receiver - Nikon: The Phottix Strato TTL Wireless Flash Receiver for Nikon is designed for use with the Nikon dedicated Strato TTL Trigger allowing the triggering of more than one flashgun at a time. The Phottix Strato receiver powers on 2x AA alkaline or rechargeable batteries (not included, available separately).

Phottix Strato TTL Wireless Flash Receiver - Canon

Phottix Strato Ttl Wireless Flash Receiver - Canon

Phottix Strato Ttl Wireless Flash Receiver - Canon: The Phottix Strato TTL Wireless Flash Receiver for Canon is designed for use with the Canon dedicated Strato TTL Trigger allowing the triggering of more than one flashgun at a time. The Phottix Strato receiver powers on 2x AA alkaline or rechargeable batteries (not included, available separately).

Phottix Odin TTL Flash Trigger Transmitter - Canon v1.5

Phottix Odin Ttl Flash Trigger Transmitter - Canon V1.5

Phottix Odin Ttl Flash Trigger Transmitter - Canon V1.5: This Odin transmitter enables the wireless control and triggering of Canon flashes and the Phottix Mitros+ from up to 100m. A receiver unit is also required, available separately, or as part of a Tx/Rx kit.

Phottix Odin TTL Flash Trigger Transmitter - Nikon

Phottix Odin Ttl Flash Trigger Transmitter - Nikon

Phottix Odin Ttl Flash Trigger Transmitter - Nikon: This Odin transmitter enables the wireless control and triggering of Nikon flashes and the Phottix Mitros+ from up to 100m. A receiver unit is also required, available separately, or as part of a Tx/Rx kit.

StarTech.com VGA Video Extender over Cat 5 Remote Receiver with Audio

Startech.com Vga Video Extender Over Cat 5 Remote Receiver With Audio

Startech.com Vga Video Extender Over Cat 5 Remote Receiver With Audio: The STUTPEALRGB is the receiver unit utilized by the STUTPEAGB VGA and audio over Cat 5 extension series. This convenient video distribution system simplifies implementing digital signage solutions by allowing a single VGA source and corresponding audio to be broadcast to multiple displays at up to 300m (950ft) away. Comprised of one receiver unit per display, as well as a 4 port VGA & audio extender unit (ST124UTPEAGB) or an 8 port VGA & audio extender unit (ST128UTPEAGB), the VGA and...

Interfit Strobies Receiver for for ProFlash TLI-C/TLI-N Flashgun

Interfit Strobies Receiver For For Proflash Tli-c/tli-n Flashgun

Interfit Strobies Receiver For For Proflash Tli-c/tli-n Flashgun: When used with the Pro-Flash Transmitter, this receiver unit can be used to trigger the Pro-Flash TLI-C/TLI-N Flashgun wirelessly from up to 50m (165 feet) away. The receiver plugs into the Wireless Control Port on the side of the unit and does not require batteries. The receiver operates over 16 channels at 433MHz.

StarTech.com VGA over Cat 5 UTP Video Extender Receiver

Startech.com Vga Over Cat 5 Utp Video Extender Receiver

Startech.com Vga Over Cat 5 Utp Video Extender Receiver: The ST121RGB VGA over Cat5 video extender receiver is specifically designed for use as the receiver unit to the StarTech.com ST1214TGB 4 port VGA over Cat5 UTP Extender transmitter, allowing you to split and extend a single VGA source to up to four remote displays. From the transmitter device, the VGA video signal is sent over standard 4 pair category 5 or better UTP cable to remote monitors, each connected to an ST121RGB Cat 5 VGA receiver - supporting distances of up to 150 meters (500...

Startech VGA over Cat 5 UTP Video Extender Receiver - For ST1214T - Upto 150m

Startech Vga Over Cat 5 Utp Video Extender Receiver - For St1214t...

Startech Vga Over Cat 5 Utp Video Extender Receiver - For St1214t - Upto 150m: The ST121RGB VGA over Cat5 video extender receiver is specifically designed for use as the receiver unit to the StarTech.com ST1214TGB 4 port VGA over Cat5 UTP Extender transmitter, allowing you to split and extend a single VGA source to up to four remote displays. From the transmitter device, the VGA video signal is sent over standard 4 pair category 5 or better UTP cable to remote monitors, each connected to an ST121RGB Cat 5 VGA receiver - supporting distances of up to 150 meters (500...

Startech VGA over Cat 5 UTP Video Extender Receiver - For ST1214T - Upto 150m

Startech Vga Over Cat 5 Utp Video Extender Receiver - For St1214t...

Startech Vga Over Cat 5 Utp Video Extender Receiver - For St1214t - Upto 150m: The ST121RGB VGA over Cat5 video extender receiver is specifically designed for use as the receiver unit to the StarTech.com ST1214TGB 4 port VGA over Cat5 UTP Extender transmitter, allowing you to split and extend a single VGA source to up to four remote displays. From the transmitter device, the VGA video signal is sent over standard 4 pair category 5 or better UTP cable to remote monitors, each connected to an ST121RGB Cat 5 VGA receiver - supporting distances of up to 150 meters (500...

StarTech.com VGA over Cat 5 Extender Remote Receiver (UTPE Series)

Startech.com Vga Over Cat 5 Extender Remote Receiver (utpe Series)

Startech.com Vga Over Cat 5 Extender Remote Receiver (utpe Series): Extend and Distribute a VGA Signal to a Remote Display over Cat5 Cabling (Receiver Only). The STUTPRXLGB VGA Video Extender Remote Receiver over Cat 5 (UTPE Series) can be installed with the StarTech.com 4 port, 8 port or wall-plate VGA over Cat 5 extenders (ST124UTPE / ST128UTPE), enabling remote monitors to be connected up to 300m (950ft) away from the source. Supporting a maximum resolution of 1900x1200 (resolution varies by distance), this VGA over Cat 5 receiver unit provides crystal...


12345678910Next